Sanus Wall Mount

Nowadays, technology is growing, to the electronic media that we often use to obtain information also develops like television, ranging from the broad shape to the slim form factor, which is wasteful of energy to energy-efficient, which is now in the presence of television began to lean such as LED or LCD television, even saving space for the owner, especially if you put it on a wall bracket and put it in the living room, family room, bed room and other rooms as needed owners.

Installing the bracket is easy to hard, easy it is when you just put the TV on the chassis bracket, difficulty when having to bother to drill and measure the balance and accuracy in the beginning before drilling in the wall of the house.

Here we would like to share a bit of how the television on the wall mounting bracket for LED TV / LCD that might be useful to readers, before there is some equipment that you need to prepare, among other things:

1. Bracket TV
2. Ruler
3. Pencil
4. Drill
5. Screwdriver with size in accordance with the nut provided in the bracket

For the installation method, first used to estimate the size of the television you currently want to display in a measure of how high the wall, or can use a ruler to measure the height of how long to expect from the floor to the bottom upwards, then to the bracket that has the advantages of DOF (degrees of freedom such as dual arm that can reach out to the right and left with more extensive) try not blocked cupboard or the like objects.

Once you have determined the proper position, hold the bracket in position (make sure the position is correct) and then use a pencil to mark the holes provided on the bracket to the wall, mark with a pencil and filled in the hole to form streaks corresponding holes with bracket.

After marking the wall is completed, you are able to prepare your drill machine and start drilling the wall that has been marked. Before drilling, drill bits select the closest size of the hole and the size of the plastic nails (a kind of white plastic that will be incorporated into the wall, the retaining bracket function is as a television which will be paired with nut to hold the bracket in order not to fall) that is provided on the bracket (usually bracket is included in the packaging).

When you have started to drill try not too shallow or too deep, you can estimate the length of the plastic spikes with a depth that has been penetrated by the drill bit. Do not forget you have to clean up after drilling the borehole so as not to disturb it later when you pair a plastic nail into the wall, you can clean it using the drill bit by pulling out the dust.

Once you successfully perform drilling, it's time you put a bracket on the wall, you first need to install (enter) first nail into the plastic of the wall, after that you can install steel / iron retaining bracket (varies, depending on which bracket you are using) then followed with a nut to lock the holder into the plastic spikes.

After successfully retaining bracket is installed properly, you are able to rely on the retaining bracket arm with safe, you do not have to worry about your TV bracket and fall if you've set it up properly and does not exceed the maximum limit of the bracket (usually written on cardboard bracket). Do not forget to lock the retaining bracket (if any) to ensure the position of the bracket will not move or fall when bumped.

For bracket that attaches to the TV, make it more secure, you can set it up before the retaining bracket mounted to the bracket, so that when the television is already attached to the bracket you can easily put the television safely and comfortably in the bracket and you can enjoy watching a favorite television broadcasts you are.

Similarly, we can convey information, may be useful and helpful.