Sanus Wall Mount

Mounting a TV on your Video Basics wall bracket might seem like a tough do-it-yourself project, but the process is actually not difficult. A good tool box is enough to get the job done. The TV mounting kit comes with all the hardware. The entire process of mounting your TV to your Video Basics wall bracket takes less than an hour to complete.

Instructions

1

Locate two vertical wall studs by running a stud finder against the wall in the area you want to mount your TV. When you find the studs, mark where they are on the wall using a pencil.

2

Hold the Video Basics wall bracket against the wall and insert the lag bolts through the mounting holes. Tighten the lag bolts into the wall studs with a wrench. The mounting bracket is now mounted on the wall.

3

Turn the TV around so you can easily see and access the back. Hold the TV bracket against the TV so its VESA holes line up evenly with the VESA holes of the TV. Insert the VESA screws through the VESA holes of the TV bracket into the TV and tighten with a Phillips-head screwdriver. The TV bracket is now mounted to the TV.

4

Take the TV over to the mounted wall bracket and line up the connections so the TV bracket fits into the wall bracket. Insert the security screws to connect the brackets.