Sanus Wall Mount

You can mount flat-panel TVs on walls because they weigh much less than a conventional rear-project set. To mount a flat-panel TV on a wall, first install the wall brackets into the mounting slots included on the back. The manufacturers build the mounting slots into the chassis, and the slots work in tandem with commercial wall brackets that you can purchase at electronic and audio/visual stores. The procedure is straightforward and will not harm the flat-panel TV in any way.

Instructions

1

Remove the screws that surround the wall-bracket plates on each of the two wall brackets with the Phillips screwdriver. Slide the wall-bracket plates off each of the two wall brackets.

2

Remove the screws from the two wall-bracket plates with the Phillips screwdriver. Hold the wall bracket plates with the "top" label at the top. Slide one of the wall-bracket plates into the slot on the left side of the flat-panel TV. Slide the other wall-bracket plate into the slot on the right side of the flat-panel TV's back.

3

Attach the screws you removed earlier back into the wall-bracket plates with the Phillips screwdriver. Tighten the screws to secure the plates to the back of the flat-panel TV.

4

Slide the wall-bracket plates back into the two wall brackets. Reattach the screws into the wall brackets with the Phillips screwdriver. Tighten the screws to secure the plates to the wall brackets.