Sanus Wall Mount

Flat panel mounts consist of two core components; the wall bracket, and the TV bracket that attaches to the set. When both pieces are combined on the wall, the image of what most picture as the quintessential flat panel installation begins to take form. Placing the set on a wall bracket frees up floor space, increases viewing accessibility, and enhances the slim form factor of the set. Most of the required hardware is included with the mounts, speeding up the installation process.

Instructions

1

Locate two studs on the proposed mounting wall. Holding the wall bracket against the wall, mark through at least four bolt holes with the tip of the drill bit into the studs.

2

Drill out the marked locations with the 3/16 inch drill bit.

3

Place the wall bracket back against the wall, and drive the included lag screws and washers through the mount into wall studs with the ratchet and socket set.

4

Set the TV bracket against the back of the TV, aligned with the brass-colored inserts. Screw in the included screws with the supplied tool.

5

Lift and hang the set onto the wall bracket. Tighten any security screws on the mount with the included hardware.