Sanus Wall Mount

Wall-mounted television rails bring more options to a room than any other form of television stand. Wall-mounted television rails are welcomed in small spaces as they do not take up needed floor space. Installing a television rail requires two people and a dependable support rail for your system. With a little time and patience, a reliable television mount can be installed by following a few short steps.

Instructions

1

Locate wall studs using a stud finder. Studs are typically located every 14- to 18-inches beneath the wall boards. Mark the stud locations using a pencil. This will establish where the mounting bracket will be hung.

2

Line up the mounting bracket holes with the studs, and drive two heavy duty screws directly through the holes into the studs.

3

Place the television on a flat surface with the screen facing down. Locate the mounting screw locations on the back side of the television.

4

Place one mounting hook over the screw hole locations, lining up the top and bottom hole to the top and bottom screw locations on the television. These holes are pre-drilled and contain a metal line inside to easily insert a bolt or screw.

5

Drive one screw through each of the four holes on the back side of the television to connect the mounting hooks to the television.

6

Lift the television and place the hooks over the top and bottom slots on the mounted wall bracket. Position the television as desired.