Sanus Wall Mount

Mounting your plasma TV to a wall can provide a better view of the screen and save floor space. It can eliminate the need for a large entertainment center. However, careful consideration is necessary for mounting a TV to a wall. One simple mistake could damage the wall and the television.

Instructions

1

Collect all of the equipment you will need to mount your TV. It is important that you have everything you will need before starting this project.

2

Decide which wall you will use. Look for studs in the wall using a stud finder. Mark the location of the studs behind the wall with a pencil. You are going to drill bolts into these studs to support the TV, so mark at least four stud locations. Consider how high you want to mount your TV as you mark the studs.

3

Check that your studs are even using a level. Simply hold the level up the stud marks on the wall. Erase your stud marks and redraw them if necessary.

4

Drill the mounting screws into the wall where you have marked the stud locations. Ensure that you are hitting the studs or the wall mount will not support your TV. Attach the wall mounting plate to the mounting screws.

5

Take a few minutes to inspect the back of your TV. You should notice a bracket area at the back of the TV that will allow you to connect screws to the TV. Attach the mounting bracket to the rear of your TV using a screwdriver and a set of screws.

6

Pick up your TV. Hang the mounting bracket at the back of the TV to the wall mounting plate attached to the wall. You may need assistance from another person to lift your TV.

7

Lock the TV in place if your wall mount comes with a locking feature. This usually involves securing an additional bolt. Gently apply pressure and shake the TV to make sure it is stabilized.